EVO CUT 100 Inverter
c/w Plasma Cutting Torch 6m, Earth Return Lead 3m
Order Code: EP-100
List Price: £2498
Discount available from your local dealer
Key Features
• Rugged, ergonomic design
• ClearVision technology
• HF stabilising technology
• SurePlasma technology for consistent arc ignition
• Mesh cutting, 2T/4T, non HF arc ignition and pilot arc
• Gas check, postflow time setting
• Cutting torch length setting
• Generator friendly
• Quick factory reset; auto sleep mode
• ABAP: Active Balancing Air Passage
• Fan on demand
• Key power electronic component protection
• Overcurrent and overheat protection
• USB Type-C port for software updates and device charging
• 14 Pin CNC interface
• Optional intergrated compressor
Industrial Design Highlights
Lateral Plate
Detachable for easy servicing, reinforced for enhancing the structures impact strength.
Front Grill
A sloped front grill offers a perfect balance between heat dissipation and ingress protection (IP23S).
Overall Look
Rugged, robust and industrial.
Control Panel
Slanted 45° angle for enhanced visibility and viewing comfort.
Streamlined Handle
Elevates overall aesthetics of the power source and provides a comfortable, firm and glove-friendly grip.
Choice of Cutting Modes
Select between 2T/4T latch or mesh cutting.
Auto Sleep Mode
The power source will enter standby mode after being idle for 10 minutes. This will reduce the power consumption to below 15W and reduce energy costs.
Overheat & Overcurrent Protection
The overheat warning light indicates that the machine has entered overheat protection and stops the welding output, the machine will re-activate once the unit has cooled down.
The overcurrent warning light indicates that the machine has entered over-current protection and stops the output. The machine can be reset by turning off and then back on.
Quick Factory Reset
Quick reset to the factory programmed settings in the
event of the operator selecting an incorrect setting.
Generator Friendly
The EVO CUT 100 PFC inverter can be used with an AVR (Automatic Voltage Regulator) type power generator.
Optional Accessories
EVO Compressor
Order Code: AP-150
EVO Inverter Trolley
Order Code: TR-03
CNC 14-Pin Plug & Clamp Kit
Order Code: 51006273
TM 125 6m CNC Cutting Torch
Order Code: AT70061
On Demand
Fan
Energy Saving
Environment
Friendly
Mesh
Cutting
SurePlasma
Technology
for non HF Cut
Welding
Engineer
Mode
SurePlasma
Advanced SurePlasma technology that offers consistent (non HF) plasma arc ignition. The machine automatically calculates the optimum start conditions based on the torch length.
HD digital panel providing crisp and clear reading, visible under direct sunlight.
With 45° slanted angle for improved visibility and a 41% enhanced
viewing area compared to a vertically positioned control panel.
Ideal Solution for Cutting Mesh
For cutting mesh or metal with gaps. Mesh mode eliminates the need for repeated start/start pressing of the torch trigger.
Active Balancing Air Passage
-
Internal airflow is optimally diverged by a segregation structure.
-
The divergence of airflow can dissipate heat generated by power electronics in a more balanced manner.
-
The power source's overall reliability is improved with the internal structure design.
Energy Saving Smart Fan
The on demand Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.
Compressed Gas Check
The machine is equipped with a gas check function and indicator light above. A test can be carried out when the inverter is not in a cutting state.
Technical Data
Sales Leaflet PDF
Operator Manual PDF
Plasma Cutting Guide PDF
